Follow

How to create an L-shaped stair case with landing

The L-shaped stair case shown below can be created in five easy steps:


How to make this stair

1. Select the Polystair icon from the toolbox.

2. Click on your Plan to start drawing the stairs. Move the mouse to the right and in the Tracker, enter Distance = 1800 and Angle = 0°. Press enter to confirm the settings.
3. In the Pet Palette, change the Run type to Landing  and move the mouse to the right and enter Distance = 1250 and Angle = 0°. Press enter to confirm the settings.
4. Move the mouse down and in the Tracker, enter Distance = 1250 and Angle = -90° or 270°. Press enter to confirm the settings.
5. In the Pet Palette, change the Run type to Flight. Move the mouse down and enter Distance = 1800 and Angle = -90° or 270° in the Tracker. Press enter to confirm the settings in the Tracker.
6. Click the mouse on the last point to complete the geometry.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk