Having problems adding a Roof Covering?

If you are having problems adding a Cadimage Covering to a roof, we suggest you  check the following common issues:

  • Ensure you have at least one Roof element (the base geometry) for the covering to be applied to.
  • Ensure the base geometry is as complete as possible before adding the covering. This means you need to have the correct intersections between the various elements (ridges and valleys etc). You can modify this after the Cadimage Covering has been applied, however it is best to start the process with a complete roof.
  • Make sure your ARCHICAD roof connects properly. If this isn't set up correctly the Cadimage Roof Covering will not be able to 'attach' and show correctly either.

Adding Skylights? These can be added before or after the Roof Covering.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk